01 / Capture
The seats mechanically capture the stone.
The nominal CAD locally captures the stone without friction or preload. Both analyzed profiles retain the same nominal capture geometry.
East–west emerald band · US 10½
Compare three diamonds and explore their profiles, including a wider, corner-held option for the 4.37 ct stone.
Selected design
Nominal dimensions follow the approximate stone geometry.
Based on the selected ring's CAD volume.
Finished-ring metal only; casting sprues, extra stock and process losses are not included.
Retention study
Historical US 9.5 / Ø19.40 mm comparison: 4.37 ct · LG742548068 · refined 3.0 mm and open-bridge 3.0 mm. These results do not apply to the current US 10.5 designs.
The findings below describe the archived smaller ring, not any current viewer selection.
01 / Capture
The nominal CAD locally captures the stone without friction or preload. Both analyzed profiles retain the same nominal capture geometry.
02 / Open bridge
The windowed bridge is about 11.1% more compliant under balanced end opening. Removing the center floor does not remove the end-seat capture.
03 / Setting direction
The models do not support a spring-open, snap-shut setting. The next design step is an intentional local closing operation for the retaining lips.
| Model result | Refined 3.0 | Open bridge 3.0 |
|---|---|---|
| Guided upward motion · 0.010 mm | 157.5 N | 155.6 N |
| Sideways motion · 0.010 mm, free to tilt and settle | 22.0 N | 21.5 N |
| Elastic end-opening compliance · at each end | 0.0763 µm/N | 0.0848 µm/N |
For the separated-seat, straight-up path studied, the stone clears at 0.400 mm total opening (0.200 mm at each end). This is not a global release minimum. Receding each end-aperture edge by 0.050 mm lowers that defined opening to 0.300 mm.
An empty-setting 0.400 mm spread followed by unloading leaves 0.347 mm mean opening in the refined model and 0.343 mm in the windowed model under idealized perfectly plastic material assumptions. Exact large-strain forming numbers are not production predictions.
First local yielding is not release. A small guided upward motion followed by unloading returns near the initial position, with localized plasticity.
Pt950Ru yield strengths: 225 MPa as-cast and 236 MPa after hot isostatic pressing (HIP). Elastic modulus E = 170 GPa and Poisson's ratio ν = 0.38 are assumed. Sharp-edge stress concentrations and fixture choices introduce uncertainty.
The small force differences between profiles are comparable to numerical sensitivity: changing contact stiffness shifted the upward result by 2.8%. They do not establish a release-strength ranking. Local lip closure is a proposed design direction, not a demonstrated setting process.
This analysis does not qualify impact, fracture or fatigue performance. Real-stone geometry, setting operations and production tolerances still need physical evaluation.
Share with your jeweler
Download the STEP file for CAD review and editing. It contains the ring and reference diamond as separate solids and matches your selected design.
Study geometry, not production-ready files.
This is a design and simulation study, not manufacturing approval. Retention findings describe only the historical US 9.5 models identified above; they do not apply to any current US 10.5 design.
Stone envelopes follow grading reports; unmeasured facets, girdles and corner cuts are approximate. Original and refined bands match the selected stone's width. Refined profiles change the under-finger taper, shoulders and pocket; the open bridge removes the center floor while retaining the end seats. The 4.37 ct corner-held option adds 0.50 mm band width and lower descending shoulders. Its four covers span the full modeled clipped corners and blend continuously into the adjacent sides, retaining full end seats and the cleaning window. Actual corner coverage still requires the real diamond's measurements.
The finger and hand are generic scale references, not personal scans or fit predictions. Rendered appearance does not predict a real diamond's optics.